Xiaomi Redmi note 3 (Snapdragon) Unlock Bootloader, Install TWRP and ROOT (No Permisson needed) (+/-)
*Warning All data will be wiped*
Pre-Requisite:
Phone should have atleast 50% charge
USB cable to connect your phone
A working PC running on Windows OS
Step 1: Download these files
Miflash tool:
http://www.mediafire.com/file/ ... ip%27
Rom:
http://bigota.d.miui.com/V8.0. ... 4.tgz
ADB Drivers:
https://drive.google.com/file/ ... /view
Modded bootloader file and TWRP:
http://www.mediafire.com/file/ ... 9.rar
Fastboot EDL:
http://www.mediafire.com/file/ ... E.rar
Superuser:
http://www.mediafire.com/file/ ... 3.zip
Step 2: After downloading the Mi flash tool and ADB driver install both of them on your pc. After that restart your pc
Unzip the Rom and unlock bootloader.rar
(here i will use the lollipop based modded bootloader file.
now replace the Recovery.img and emmc_appsboot.mbn
Step 3: Switch off your phone and enter into Fastboot mode by pressing "Volume down + Power button" at the same time.
then connect your device to pc by USB cable.
Step 4: Open Fastboot EDL folder and Run edl.cmd.
Step 5: Launch Mi flash tool when its connected to your device with usb cable. you'll see a figure like i show with your device id.
Step 6: Again enter into Fastboot mode by pressing " Volume down+Power button" at the same time.
Run unlock bootloader.bat.
Step 7: Boot into TWRP mode by pressing "Volume up+ Powerbutton" at the same time directly from EDL mode
Open TWRP and install SU.zip.